How To Ride Your Bike - Bajaj Pulsar 135 BS VI Owner's Manual

How to Ride Your Bike

Starting The Engine :
• Turn the fuel tap knob to
• Turn ignition switch key to '
• Confirm that transmission is in neutral.
• Keep throttle completely closed, operate
self start button or apply kick to start the
engine.
• Release kick as soon as engine starts.
Note : Before starting the engine, in ignition
key off condition, press the clutch lever &
operate kick lever all the way down for 5-6
times. Then release the clutch lever.
This practice ensures lubrication of clutch
components for their longer life.
Caution : Do not operate the starter
continuously for more than 5 seconds
otherwise battery would get discharged.
Wait 15 sec. between each operation of
the starter which will facilitate battery to
recover.
Note : Do not touch / distrub setting of idling & air screw provided on BS VI carburettor.If
required take the vehicle to workshop or authorised service dealer.
or position.
' position.
16
Note : The motorcycle is equipped with a clutch
switch. This switch ensures that engine does not
start if the transmission
However, the engine can be started in any
gear if the clutch lever is pressed.
This vehicle is equipped with BS VI
carburettor having Auto choke.
The control unit operates ON / OFF function of
Auto Choke. No manual operation is required.
Auto choke ensures smooth starting of
engine in all weather conditions.
Auto
choke
is in gear.