CAME VLR01DX Installation Manual page 24

Shutter operator
Hide thumbs Also See for VLR01DX:
Table of Contents

Advertisement

Available languages

Available languages

  • ENGLISH, page 24
KEY
This symbol shows which parts to read carefully.
⚠ This symbol shows which parts describe safety issues.
☞ This symbol shows which parts to tell users about.
All measurements, unless otherwise stated, are expressed in millimetres.
REFERENCE REGULATIONS
CAME S.p.A. the company is quality and environmentally certified by the ISO 9001 and the ISO 14001 respectively, for its
management systems.
This product complies with the current regulations mentioned in the declaration of conformity.
DESCRIPTION
This product is designed and built by CAME S.p.A. in conformity with current safety laws.
The operator is composed of a part made of cast aluminium inside of which works the irreversible gearmotor plus an
aluminium casing.
The range
The operators:
001VLR01DX
Right-hand irreversible OPERATOR for controlling one-leaf swing shutters, complete with control board and
transmission-arm guide.
001VLR01SX
LEFT-HAND irreversible operator for controlling one-leaf swing shutters, complete with control board and
transmission-arm guide.
001VLR02
Irreversible operator for controlling two-leaf swing shutters, complete with control board and transmission-
arm guides.
The transmission arms:
001VLR07DX
RIGHT-HAND curved transmission arm for single-panel shutters.
001VLR07SX
LEFT-HAND curved transmission arm for single-panel shutters
001VLR08DX
Adjustable curved RIGHT-HAND transmission arm for shutters with either single of double jointed panels.
001VLR08SX
Adjustable curved LEFT-HAND transmission arm for shutters with either single of double jointed panels..
001VLR09DX
Adjustable RIGHT-HAND augmented curved transmission arm for jointed double-panel shutters.
001VLR09SX
Adjustable LEFT-HAND augmented curved transmission arm for jointed double-panel shutters.
001VLR10DX
RIGHT-HAND augmented curved transmission arm for single-panel shutters.
001VLR10SX
LEFT-HAND augmented curved transmission arm for single-panel shutters
The optional accessories:
001VLR04
Covering cross-piece for the VLR02 with light bays greater than 970 mm.
001VLR05
Emergency operation device, complete with 12 V batteries and battery-charging card.
Intended use
The VOILA operator is designed for opening and closing one-leaf or two-leaf swing shutters.
By shutters we mean
Any installation and/or use other than that specified in this manual is forbidden.
Limits to use
Model
Max. leaf width (m)
Maximum gate-leaf weight (kg)
VLR01DX - VLR01SX
1.05
35
VLR02
2.1
35

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vlr01sxVlr02

Table of Contents