Griddle - Jenn-Air PRO-STYLE JGRP748HM Use & Care Manual

Dual fuel convection ranges
Table of Contents

Advertisement

Available languages

Available languages

To Replace:
1.
Replace drip tray.
1
Slide drip tray into opening on the left front side of the grill
basin.
2.
Place deflector on top of burner
assembly.
3.
Place grill grate into position.
16-Jan-2019 04:15:32 EST | RELEASED
CARE AND CLEANING

GRIDDLE

Tips:
Drip tray
1
Do Not Use:
After Each Use:
1.
Wait until preheat is complete before cleaning.
2.
Using a measuring cup, pour up to 1 cup (236.6 mL) tap
water over the soiled area. Start at the back, allowing the
water to run toward the drip tray in the front. Allow the water
to bubble on the griddle for 3–4 seconds.
3.
Use a pad holder or wooden spoon with a non-abrasive pad
or cloth. Use pressure on soiled areas. Repeat if needed for
heavy soils.
In some European factories the letter "W" of the part code mentioned herein will be automatically
replaced by the number "4000" (e.g. "W12345678" becomes "400012345678")
Prior to cleaning the griddle, make sure that all cooktop
burners and oven controls have been turned off.
For best results, clean the griddle shortly after removing the
food.
Soap
Abrasive materials
Cleaning materials, including stainless steel cleaner
Turn knob to 300°F (149°C) to preheat.
Pour water on soiled area.
Scrape residue into drip tray.
29

Advertisement

Table of Contents
loading

Table of Contents