Table of Contents
Advertisement
11
Reception result display
Check whether reception was successful
The results of GPS reception (time adjustment or time zone adjustment) and leap second data reception (successful /
failed) are displayed for 5 seconds.
1
Press Button A and then
release it
The second hand and
indicator hand display the
reception result.
and then
release
When Button A is kept
pressed, the watch
enters the Manual time
adjustment operation.
23
2
The result of the reception is
displayed
The second hand displays
the result of the GPS signal
reception (time adjustment
or time zone adjustment).
The indicator hand points
to "1" or "4+" which
shows "time adjustment"
Press
or "time zone adjustment. "
The indicator hand points to
"4+" as a result of time zone
adjustment.
Second hand: Reception result
(successful / failed)
Result
Successful
Display
Position Y 8-second
position
After 5 seconds have elapsed
or when Button B is pressed,
the watch returns to the time
display mode.
3
Press Button A and then release it while the result of the reception is
displayed (for 5 seconds) in step 2
The second hand displays the
result of the leap second data
reception (successful / failed).
The indicator hand displays
"LEAP SEC. " of the leap
second data reception.
After 5 seconds have
elapsed, or when Button
B is pressed, the watch
returns to the time display
mode.
Failed
N 52-second
position
Second hand: Reception result
(successful / failed)
Result
Successful
Display
Y 8-second
N 52-second
Position
Press
position
and then
release
When the leap second data
reception result is Y (successful)
• The leap second data reception was
successful.
Use the watch as it is.
When the leap second data
reception result is N (failed)
• The leap second data reception,
periodically performed, has not been
successful.
It will be performed automatically
with the next GPS signal reception
(automatic time adjustment, manual
time adjustment or time zone
adjustment).
Use the watch as it is.
The leap second data is received on
or after December 1
and June 1
st
Even when the leap second data
reception has not been successful,
the time is correct until the leap
second data is added (deleted).
Failed
position
.
st
24
Advertisement
Table of Contents
