Table of Contents
Advertisement
6
To adjust the time zone and time by GPS signal reception (time zone
adjustment)
Time zone adjustment
The time zone where you are is localized to adjust
button operation anywhere in the world.
DST (daylight saving time or "summer time") is set manually
How to adjust the time zone
Go to a place where
1
GPS signals can be
easily received
Move to the outdoors
under an open sky
with good visibility.
Precautions on time zone adjustment
When time zone correction is performed near a border between
zone) may be displayed.
In some areas the boundaries observed by the watch may not
This does not indicate a malfunction. In this case, please set
When the time zone is adjusted while traveling on land, avoid
representative cities in the time zone whenever possible.
When using the watch near a time zone border, be sure to confirm
13
Continue to press Button B (3 seconds),
2
and then release it when the second hand
moves to the 30-second position
When the second hand has reached
the 30-second position, reception is
started.
The indicator hand points to "4+. "
While the indicator hand points to "low" or
reception is not started even with operation
for reception.
When the hand points to "low, " charge the
watch by expose to light.
When the hand points to
, reset the in-
flight mode ( ).
the watch to the precise current time by just one
3
Direct the watch face upward and
wait
Please note that it may be difficult to receive
GPS signals while you are in motion.
It takes a maximum
of 2 minutes to
complete reception.
It depends on the
<
Display during reception (= satellites
acquisition status)
The second hand indicates ease of
receiving (= number of GPS satellites
from which GPS signals are received).
The larger the number
of acquired satellites
there are, the easier
Press for
it is to receive GPS
3 seconds
signals.
Second hand
position
25-second
Number of
,
satellites
5 units
Even when the hand
points to 4 units or
more, reception may
not be allowed.
To cancel the
reception, press
Button B.
time zones, the time for the neighboring time difference (time
exactly correlate to the actual time zone markers on the land.
(select) the time difference manually.
time zone boundaries to carry out time zone adjustment in the
the time and set (select) the time difference manually as necessary.
When the second hand
4
points to "Y" or "N,"
reception is completed
The reception result is
displayed for 5 seconds.
If reception is successful,
the time and date are
adjusted.
The settings for the time
receiving conditions.
zone are reflected in the
time that appears.
>
Reception
result
display
0 units
Display
2 units
3 units
State
May
receive
The buttons cannot be
4 units
operated while the hour and
5 units
・ ・
minute hands, indicator hand
・
6 units
and date are moving.
Press
Button B
Y: Successful
N: Failed
(8-second
(52-second
position)
position)
Use the watch
as it is.
14
Advertisement
Table of Contents
