How To Check When The Time Zone Information Was Configured For Your Watch - Seiko ASTRON GPS SOLAR 3x62 Handy Manual

12
How to check when the time zone information was configured for
your watch
The case back shows the caliber-case
Caliber/case
number
The number
to identify the
watch type
 Display may vary depending on the model.
25
number of your watch.
By referring to caliber-case number shown on the case back, you will be
able to determine when the time zone data was configured.
For more details, refer to the URL below.
https://www.seikowatches.com/global-en/customerservice/
knowledge/gpstimezonedatainfo/
In a region where the time zone has changed after time zone information
was set on your watch, the correct time will not be displayed even if
time zone adjustment is performed through GPS radio reception. Please
perform the following operations to display the proper time.
<To set the time on the product in a region in which the
time zone has changed>
1. Select the current time in the region, using the manual time difference
setting (selection).
If DST (daylight saving time or "summer time") is in effect, select a
time that takes that into account.
→ For details, please refer to "8. Setting the destination time zone
while in flight, etc. (manual time difference setting), and setting/
resetting DST (daylight saving time or "summer time")"
2. Next, adjust the time by manual time adjustment.
→ For details, please refer to "7. To adjust only the time by GPS signal
reception (manual time adjustment)"
3. When using the watch within the same time zone, the correct time will
be displayed after automatic (GPS) or manual time adjustments.
4. When moving from a region where the official time zone has changed
to a different time zone, then back to the region where the official
time zone has changed, carry out the same operations from 1. - 3. as
indicated above to display the correct time in the region where the
official time zone has changed.
P. 17
P. 15
26