Table of Contents
Advertisement
2. TIME SYNCHRONIZATION VIA BLUETOOTH COMMUNICATION
How to Receive Time/Calendar Data (2)
■
Display of Reception Result
●
A fter the communication was performed either automatically or
manually, the hour hand and minute hand indicate the reception result
for 5 seconds.
※ If the time of automatic reception comes while in CALENDAR mode,
the mode changes over to TIME after the reception result is displayed.
[ When the reception was successful ]
When the data was received normally, the hour hand and minute
hand point "YES" near the 2 o'clock position.
[ When the reception failed ]
When the data reception failed, the hour hand and minute hand
point "NO" near the 4 o'clock position.
"
YES
"
NO
"
"
13
●
Ⓑ
Press Button
while in TIME mode. The hour hand and minute
hand point to "YES" or "NO" to indicate the result of the last
reception performed in the past 24 hours for 5 seconds.
Button
[ TIME mode ]
※ If no reception succeeded or no communication was performed
in the past 24 hours, the hour hand and minute hand point to
"NO."
If the reception failed, check the following before performing manual
reception again:
・ Is the smartphone kept within 3 meters from the watch?
・ Is the dedicated application on the smartphone kept running?
・ Is the watch registered to the dedicated application, and is the
application configured properly?
"
YES
"
Ⓑ
[ Reception succeeded ]
NO
"
"
[ Reception failed ]
Advertisement
Table of Contents
