Controlling In The Camera Preset Memory Screen - Panasonic AV-UHS5M6G Operating Instructions Manual

Remote camera link functions

Controlling in the camera preset memory screen

When a remote camera has been connected to AV-UHS500, it is possible to control the camera whose camera preset memory
thumbnail images are selected while displaying on the built-in display in the camera preset screen.
1 Press the CAM button.
PMEM
2 The display on the built-in display on AV-UHS500 changes.
p You can save and replay preset memories by using the number keys.
p Use [F5] to change the preset speed.
A maximum of 100 preset memories can be saved on the remote camera connected to AV-UHS500.
p p They are not stored in AV-UHS500.
100 preset memories are divided between 10 pages, so 10 preset memories can be saved in 1 page.
The number key that corresponds to the preset memory that was recalled last on AV-UHS500 turns amber.
You can select the operation for the preset memory each time you press the
p p While the button is lit red, you can store preset memories by holding down the number keys.
STORE
p p While the button is lit amber, you can execute preset memories by pressing the number keys.
RE
CALL
p p Changing the preset scope/preset
speed
p p Zoom control
F1 F2
KEY1 KEY2 KEY3 DSK1
F/S F/S F/S F/S
AMBER : FILL / GREEN : SOURCE
AUX
p p Switching of the camera that is the target of operation by the CAM bus
p p PMEM operation selection
F3 F4 F5
DSK2
AUX1 AUX2 AUX3 AUX4
F/S
AUX BUS DELEGATION
/ /
RE
STORE DEL
CALL
p p Execute operations corresponding to PMEM
DISPLAY
SHOT 7 8
STORE
MEM NEW COPY
STILL 1 STILL 2
EVENT RE 4 5
MEM CALL INS DEL
CLIP 1 CLIP 2 TRIM OUT
1 2
MACRO DEL
< >
< >
CAM
0/10 .
EDIT
PMEM << >>
<< >> TRIM OFF
MEMORY / WIPE PATTERN / 10 KEY
DISP
MV1 PGM
MACRO
MV2 PVW
CAM
AUX /DISP SOURCE
SHIFT BKGD
MIX
26
buttons.
MENU
9 XPT
PASTE DSBL
TRIM IN REC
6 -/+
MOD PAGE
STOP
3
REV
REV TAKE
ENTER
C
UNDO
PLAY
KEY
MIX