Panasonic AV-UHS5M6G Operating Instructions Manual page 34

Setting menu table
Sub menu
Menu
Use [F1] to select.
*2
Output (NDI) / Y Assign
Common
Setup
Multicast
Transmit
Multicast
Transmit
Group
Use Discovery
Server
*2 pp The Y part shows SDI OUT1 to SDI OUT5, OUT-A1, OUT-A2, OUT-B1 and OUT-B2. This becomes OUT-A1 and OUT-B1
for 4K.
(OUT-A1, OUT-A2, OUT-B1, and OUT-B2 are enabled when AV-UHS5M6 is connected.)
Parameter 1
Use [F2] to select. Use [F3] to select. Use [F4] to select. Use [F5] to select.
Parameter
Source
Setting range
PGM, PVW,
CLN, ME PGM,
AUX1, AUX2,
AUX3, AUX4,
MV1, MV2, Key
Out
Default value
OUT1(PGM),
OUT2(PVW),
OUT3(AUX1),
OUT4(AUX2),
OUT5(AUX3),
OUT-A1(AUX1),
OUT-A2(AUX2),
OUT-B1(AUX1),
OUT-B2(AUX2)
Parameter
Machine Name Source Name
Setting range
(Character
string up to
20 characters)
Default value
AV-UHS500
Parameter
Multicast
Transmit
Setting range
On, Off
Default value
Off
Parameter
IP Address
Setting range
(IPv4 format)
Default value
239.192.0.30
Parameter
Group
Setting range
Enable, Disable (Character
Default value
Disable
Parameter
Use Discovery
Server
Setting range Enable, Disable (IPv4 format)
Default value
Disable
34
Parameter 2 Parameter 3
Protocol
(Character
TCP, UDP
string up to
32 characters)
NDI Device TCP
Subnet TTL/HOP Limit
(IPv4 format) 1 to 254
255.0.0.0 16
Name
string up to
64 characters)
(blank)
IP Address
(blank)
Parameter 4