Table of Contents
Advertisement
Maintenance
•
Check pump wet-cups (R) daily, page 24. Keep filled
with Graco ISO pump oil, Part No. 217374, to keep
air or moisture from reacting with fluids. If oil on rods
appears milky from crystallization, wipe rods clean
and refill wet-cups with fresh ISO pump oil.
R
•
Keep component A from exposure to moisture in
atmosphere, to prevent crystallization.
•
Store Reactor with pumps at bottom of stroke. See
page 30.
36
•
Remove plugs (S) and clean fluid inlet screens as
needed.
•
Clean gun mix chamber ports regularly. See gun
manual.
TI3582a-3
•
Clean gun check valve screens regularly. See gun
manual.
•
Use compressed air to prevent dust buildup on con-
trol boards, fan, and motor (under shield).
Maintenance
S
TI3590b
309812D
Advertisement
Table of Contents
