Maintenance Screens - Graco ProMix PD2K Operation

Maintenance Screens

Screens
Maintenance Maintenance Screens
Maintenance Maintenance Maintenance Screen Screen Screen 1 1 1
Use this screen to set maintenance intervals. Set
to 0 to disable the alarm.
NOTE: The Pump Stall Test cannot be disabled. You
NOTE: NOTE:
must enter a value other than 0.
Figure 85 Maintenance Screen 1, Interval Settings
Maintenance Maintenance Screen Maintenance Screen 2 2 2 Screen
Maintenance Screen 2 shows the current interval
status of the solvent meter, fluid filter, and air filter.
Press and hold the Reset button
seconds to clear the alarm and reset the counter.
Figure 86 Maintenance Screen 2, Current Status
3A4128D
Maintenance Screen Maintenance Maintenance
Maintenance Screen 3 shows the current interval
status of the pump maintenance tests.
Press and hold the Reset button
seconds to clear the alarm and reset the counter.
NOTE: The Pump Stall Test can only be reset by
NOTE: NOTE:
successfully completing the test.
Figure 87 Maintenance Screen 3, Current Pump
Status
for 1-2
Setup Mode Screens
Screen 3 3 3 Screen
for 1-2
129