Extraordinary Maintenance - Smeg SFP580X Manual

Setting of a programmed Pyrolytic cycle
It is possible to program the pyrolytic cycle
start time like all other cooking functions.
1. After selecting the Pyrolytic function and
setting the duration (except for Eco
Pyrolytic), press the programming knob.
The display will show the current time
and the temperature, and the
indicator light will come on.
2. Turn the programming knob to set the
time you wish the Pyrolytic cycle to finish.
3. Press the programming knob to confirm
the values entered. The
indicator lights turn on steadily and
the appliance then waits for the set start
time to begin the Pyrolytic cycle.
It is not possible to select any
function once the door lock device
has been activated. It remains
possible, however, to switch off the
appliance using the specific
controls.
Cleaning and maintenance
and
,

4.7 Extraordinary maintenance

Removing and installing the door seal
(not on pyrolytic models)
To remove the seal:
• Unhook the clips in the 4 corners then
pull the seal outwards.
To refit the seal:
• Hook the clips in the 4 corners onto the
seal.
Seal maintenance tips
The seal should be soft and elastic.
• To keep the seal clean, use a non-
abrasive sponge and wash with
lukewarm water.
91