Smeg SFP580X Manual page 40

Pyrolytic cycle
1. Two minutes after the Pyrolytic cycle
starts, the indicator light comes on to
indicate that the door is locked by a
device that prevents the door from being
opened.
It is not possible to select any
function once the door lock device
has been activated.
2. At the end of the Pyrolytic function, STOP
flashes on the display and a buzzer will
sound that can be deactivated by
opening the door or pressing/rotating
one of the two knobs.
3. The door remains locked until the
temperature inside the oven returns to a
safe level. Wait for the oven to cool
down (the indicator light
and collect the residue deposited inside
the oven with a damp microfibre cloth.
90
Cleaning and maintenance
will turn off)
During the first Pyrolytic cycle,
unpleasant odours may occur due
to the normal evaporation of oily
manufacturing substances. This is
an absolutely normal phenomenon
which disappears after the first
pyrolytic cycle.
During the pyrolytic cycle the fans
produce a more intense level of
noise due to a greater rotation
speed. This is an absolutely normal
operation, intended to provide
more effective heat dispersal. At
the end of the pyrolytic cycle, the
fans will continue to operate for
long enough to avoid overheating
the walls of adjacent units and the
front of the oven.
If the pyrolytic cycle gives
unsatisfactory results at minimum
duration, it is recommended to set
a longer time for subsequent
cleaning cycles.