Smeg SFP580X Manual page 22

Programmed cooking
Programmed cooking is the
function which allows a cooking
operation to be stopped
automatically at an established
time depending on the time set by
the user, after which the oven will
switch off automatically.
1. After selecting a cooking function and
temperature, press the programming
knob three times. The display shows
and the indicator light
flashes.
2. Turn the knob to set the cooking time
(from 00:01 to 13:00). Keep the knob
turned for a fast increase or decrease.
3. Press the programming knob a fourth
time. The indicator light
the knob to set the cooking end time.
72
Use
4. After a few seconds the indicator lights
5. At the end of the cooking, STOP flashes
flashes. Turn
and stop flashing. The
appliance waits for the set start time.
on the display and a buzzer will sound
that can be deactivated by opening the
door or pressing/rotating one of the two
knobs.
To extend the cooking time
manually, press the programming
knob again. The appliance will
resume its normal operation with
the previously selected cooking
settings.
Press and hold the function knob
down to switch off the appliance.
For safety reasons, it is not possible
to set the end of cooking time by
itself without setting the cooking
duration.