Maintenance Schedule - Ariens Path-Pro SS21 Owner's/Operator's Manual

WARNING: AVOID INJURY. Read
and understand the entire Safety
section before proceeding.
Interval Task
Clean unit.
Each Use
Check engine oil.
Follow engine

maintenance schedule.

Check fasteners.
Check auger paddle
Every 10 Hours wear.
Check scraper blade
wear.
Check belt wear.
As Needed
Replace scraper blade. Replace when damaged or when scraper blade
MAINTENANCE SCHEDULE
EN - 19
IMPORTANT: Proper maintenance can
prolong the life of unit. The following chart
shows the recommended service schedule.
Action
Remove snow and debris with a soft-bristled
brush. Do not use harsh abrasives or cleaners.
NOTICE: Protect painted surfaces with
automotive-type wax.
See Engine Oil on page 14.
Perform scheduled engine maintenance. Refer
to Engine Manual for detailed instructions.
Check all fasteners. Replace missing or
damaged fasteners. Tighten all nuts and bolts to
correct torque values.
Replace when auger paddles are worn to wear
indicator holes. See Replace Auger Paddles on
page 16.
Do not allow scraper blade to wear down too far
or auger housing will become damaged. See
Replace Scraper Blade on page 17.
Adjust auger cable as needed. Replace when
damaged or when auger stops or stutters during
operation. See Replace Belt on page 17.
has been adjusted down as far as possible and
does not touch surface or clear properly. See
Replace Scraper Blade on page 17.