Transport Unit; Maintenance; Service Position; Maintenance Schedule - Ariens Sno-Thro Professional Series Operator's Manual

Figure 14

TRANSPORT UNIT

1. Stop engine and remove key.
2. Secure unit chassis to transport vehicle.
NOTICE: NEVER secure from rods or
linkages that could be damaged.

MAINTENANCE

WARNING: Read and
understand the Safety section
before proceeding.
Your Ariens dealer can provide service and
adjustments to keep your unit operating at
peak efficiency. Contact an authorized engine
manufacturer's service center for engine
service.

SERVICE POSITION

See Figure 15.
WARNING: AVOID INJURY.
Properly remove fuel before
tipping unit up onto housing to
avoid spills. (Refer to engine
manual for instructions.) Make
sure unit is secure and will not
tip.
Normal
Operation
Move Unit
Manually

MAINTENANCE SCHEDULE

Service Performed
Check Clutch Lever Operation •
Check Dual Handle Interlock
Check Fasteners
Check Clutch Cable
Adjustments *
Check Tire Pressure
Check Engine Oil
Change Engine Oil **
General Lubrication
Check Auger Gearcase Oil
Replace Fuel Filter
* After first use.
** Refer to engine manual for instructions.
NOTICE: The transmission is lubricated for
life and does not require maintenance or
level checking.
EN - 13
Figure 15
•
•
•
•
•
• •
• •
• •
•