Pentax X90 Operating Manual page 51

If you press the 4 button in Step 10, the camera clock is reset to 00
seconds. To set the exact time, press the 4 button when the time
signal (on the TV, radio, etc.) reaches 00 seconds.
When the [Initial Setting] or [Date Adjustment] screen is displayed, you
can cancel the settings made up to that point and switch to the capture
mode by pressing the 3 button. In this case, the [Initial Setting]
screen will appear again the next time you turn the camera on.
u
[Language/ ], [Date], [Time], [Hometown] and [DST] can be changed. Refer
to the pages below for instructions.
• To change the language, follow the steps in "Changing the Display Language"
(1p.208).
• To change the date and time, follow the steps in "Changing the Date and
Time" (1p.202).
• To change the city or DST setting, follow the steps in "Setting the World Time"
(1p.205).
1
49