Using The Digital Wide Function (Digital Wide Mode) - Pentax X90 Operating Manual

Using the Digital Wide Function (Digital Wide
Mode)
In X (Digital Wide) mode, you can stitch two vertical images captured
with this camera into a single frame up to approx. 20 mm coverage (35
mm film equivalent).
3
1
In A mode, set the mode dial to H and press the four-
way controller (3).
The Capture Mode Palette appears.
2
Use the four-way controller (2345) to select X.
3
Press the 4 button.
The camera enters X mode.
Hold the camera vertically so that the
shutter release button is on the bottom, and
compose the first image (left half of picture).
When the camera detects a person's face,
the Face Detection function is activated and
the face detection frame appears. (p.70)
4
Press the shutter release button halfway.
The focus frame (or face detection frame) on the display turns green
when the camera focuses on the subject at the correct distance.
98
+
38 38 38
1