Setting The Green Button - Pentax X90 Operating Manual

Setting the Green Button

You can assign one of the following functions to the 9 (Green) button:
[9 Green Mode] (p.72) or [Fn Setting]. You can activate the assigned
function by just pressing the 9 (Green) button.
Green Mode Press the 9 button to shoot in 9 (Green) mode. (Default setting)
Press the 9 button to use the functions assigned to the four-way
controller (2345). By assigning frequently used functions to the
four-way controller, you can easily change the settings during
shooting.
The functions that can be set differ depending on the capture mode
Fn Setting
used before the 3 button is pressed.
• When you press the 3 button in still picture capture mode:
• When you press the 3 button in movie recording mode:
Default settings of Fn Setting
Four-way Controller
2
3
4
5
1
Press the 3 button in A mode.
The [A Rec. Mode] menu appears.
2
Use the four-way controller (23)
to select [Green Button].
3
Press the four-way controller (5).
The [Green Button] screen appears.
Still picture capture functions are assigned.
Movie recording functions are assigned.
Still Picture Mode
Recorded Pixels
Quality Level
White Balance
Sensitivity
Movie Mode
Movie SR
Recorded Pixels
White Balance
Focusing Area
Rec. Mode
Interval Shoot
Blink Detection
Digital Zoom
Instant Review
Memory
Green Button
Cancel
MENU
3
3/4
137