Taking A Series Of Pictures (Continuous Shooting Mode) - Pentax Optio M50 Operating Manual

Taking a Series of Pictures (Continuous Shooting Mode)

In this mode, pictures are taken continuously as long as the shutter
release button is pressed.
Continuous
1
Shooting
1
Press the four-way controller (2) in A mode.
2
Use the four-way controller (45)
to select 1 (Continuous Shooting)
and press the 4 button.
The camera is ready to take a series of pictures.
3
Press the shutter release button
halfway.
The focus frame on the display turns green if
the subject is in focus.
4
Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
• The flash does not discharge in Continuous Shooting.
• 1 (Continuous Shooting) can not be chosen in b (Auto Picture),
A (Night), C (Movie), O (Voice Recording), F (Digital
Panorama) or
• You can continue shooting until the memory capacity of the SD
Memory Card or built-in memory is full.
• The interval of Continuous Shooting varies according to the
Recorded Pixels and Quality Level settings.
• The focus, exposure and white balance are locked with the first image.
• When the Face Recognition is activated (p.56), it works only when
taking the first image.
Each time a picture is taken, the image is saved in the memory
before the next image is taken. The higher the image quality,
the longer the interval between shots.
(Digital Wide) mode.
S
Shutter release
button
Four-way controller
4 button
Drive Mode Drive Mode Drive Mode
Continuous Shooting Continuous Shooting Continuous Shooting
Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel Cancel
MENU MENU MENU MENU MENU
4
OK OK OK
OK
77