Pentax Optio M50 Operating Manual page 66

• Assign 9 mode to the Green button for using 9 mode. (p.57)
• In 9 mode, you cannot change the information on the display by
pressing the 4/W button.
• You cannot use the [A Rec.Mode] menu or Capture
Mode Palette in 9 mode. If you try to display the [A
Rec.Mode] menu or Capture Mode Palette, - (key
lock icon) appears.
• If you switched to Q mode from 9 mode, you
cannot display the [W Setting] menu by pressing the 3
button. If you try to display the [W Setting] menu, - (key lock icon)
appears.
• When the camera is turned off in 9 mode, it turns on in 9 mode
next time the power switch is pressed.
4
* 9 mode settings are as shown below.
Flash Mode
Drive Mode
Focus Mode
Information Display
Recorded Pixels
Quality Level
White Balance
Focusing Area
AE Metering
Sensitivity
EV Compensation
Digital Wide
Digital Zoom
Instant Review
Sharpness
Saturation
Contrast
Date Imprint
64
, (Auto)
9 (Standard)
= (Standard)
Normal
E
D (Better)
F (Auto)
J (Multiple)
L Multi-segment metering
Auto
±0.0
P (Off)
O (On)
1sec
G (Normal)
G (Normal)
G (Normal)
P (Off)
38 38 38
Green mode must
be canceled to use
this function.
Program Program Program
Key lock icon