Setting The Instant Review Time (Instant Review) - Pentax Optio M50 Operating Manual

Setting the Instant Review Time (Instant Review)

You can choose the Instant Review time (the length of time the image is
displayed immediately after capture) from 0.5sec, 1sec, 2sec, 3sec,
5sec and Off (no display).
1
Press the 3 button in A mode.
The [A Rec.Mode] menu appears.
2
Use the four-way controller (23) to select [Instant
Review].
3
Press the four-way controller (5).
A pull-down menu appears.
4
Use the four-way controller (23)
to change the display time.
5
Press the 4 button.
The Instant Review setting is saved.
6
Press the 3 button.
The camera returns to capture status with the current setting.
Instant Review 1p.41
If the Face Recognition function worked when shooting, Blinking
Detection will operate during Instant Review (p.41).
MENU
Four-way controller
4 button
3 button
1/3
Rec.Mode
Recorded Pixels
8
M
Quality Level
White Balance
AWB
Focusing Area
AE Metering
Sensitivity
Auto
Exit
MENU
Rec.Mode 2/3
EV Compensation
5sec
Movie
3sec
Digital Wide
2sec
Digital Zoom
1sec
Instant Review
0.5sec
Memory
Off
Cancel
MENU
4
OK
OK
101