Pentax Optio M50 Operating Manual page 85

6
Press the 3 button, 4
button, or Zoom/ w/x button.
7
Press the four-way controller (2).
8
Press the 4 button.
S mode stops.
Setting the Digital Wide Function
S mode is set to O (On) in the default settings. Use the A mode to set
whether the camera enters S mode when the w side of the Zoom/w/
x button is pressed.
1
Press the 3 button in A mode.
[A Rec.Mode] appears.
2
Press the four-way controller (23) to select [Digital
Wide].
3
Use the four-way controller (45)
to select O (On) or P (Off).
The selected setting is saved.
4
Press the 3 button.
The setting is complete and the camera
returns to capture status.
Exit the Digital Wide
mode?
Exit
Cancel
OK
Rec.Mode
2/3
EV Compensation 0.0
Movie
Digital Wide
Digital Zoom
Instant Review
1sec
Memory
Exit
MENU
OK OK OK
4
83