Download Print this page

3M 8511P User Instructions

Particulate respirator with multi use duct tape

Advertisement

Quick Links

3M™ 8511/8511P Particulate Respirator with
3M™ Multi Use Duct Tape
IMPORTANT: Keep these User Instructions for reference
NIOSH approved for use only with 3M™ Particulate Respirator 8511 and 8511P Particulate Respirators and any color
3M™ Multi Use Duct Tape (1.88 inch [48mm]).
Black (3920-BK, 3960-BK)
Red (3920-RD, 3960-RD)
White (3920-WH, 3960-WH)
Blue (3920-BL)
Brown (3920-BR)
Green (3920-GR)
Orange (3920-OR)
Yellow (3920-YL)
Respirators help protect against certain airborne contaminants. Misuse may result in sickness or death. For proper
use, consult supervisor and User Instructions, or call 3M in U.S.A., 1-800-243-4630. In Canada, call Technical
Service at 1-800-267-4414.
Important information is provided in the User Instructions for 3M™ 8511 and 8511P Particulate Respirators. Failure to follow
User Instructions for these products may result in sickness or death.
Use For
The 3M™ 8511 and 8511P Particulate Respirators can be used with 3M™ Multi Use Duct Tape (1.88 inch [48mm]) when source
control is required.
This product contains no components made from natural rubber latex.
Inspection
Inspect the valved respirator and the tape prior to use.
1)
Inspect the respirator exhalation valve to ensure there is no damage or missing parts.
2)
Inspect the tape for holes and ensure adhesive is intact.
Do not use if the respirator or tape is damaged. Both products have no replaceable components.
W WARNING
User Instructions

Advertisement

loading

Summary of Contents for 3M 8511P

  • Page 1 User Instructions for these products may result in sickness or death. Use For The 3M™ 8511 and 8511P Particulate Respirators can be used with 3M™ Multi Use Duct Tape (1.88 inch [48mm]) when source control is required. This product contains no components made from natural rubber latex.
  • Page 2 Installation of 3M™ Multi Use Duct Tape Ensure the inside of the exhalation valve of the respirator is free from dirt and is undamaged. It is located on the inside of the respirator. Fig. 1. Cut tape to length of valve (approximately 41 mm) and attach tape to the inside of the exhalation valve, covering it completely.
  • Page 3 Made in U.S.A. with U.S. and imported materials. 3M Personal Safety Division 3M Center, Building 0235-02-W-70 St. Paul, MN 55144-1000 3M is a trademark of 3M or its affiliates, used under license in Canada. 3M PSD products for occupational use only. © 3M 2022. All rights reserved.

This manual is also suitable for:

8511