Page 1
8212 Particulate Respirator N95 3M recommended for welding, brazing, metal pouring and cutting User Instructions IMPORTANT: Keep these User Instructions for reference. 98-0060-0145-1/3 XX-XXXX-XXXX-X 7/22/2022...
This respirator helps protect against certain particles. Misuse may result in sickness or death. For correct use, consult supervisor and these User Instructions, or call 3M at 1-800-247-3941 in U.S.A., or 1-800-267- 4414 in Canada. This product contains a small portion of exposed aluminium. It may present a risk in an explosion protected area or any area where sparks created by contact of the aluminium with rusty iron might cause a hazard.
6. Inspect respirator before each use to ensure that it is in good operating condition. Examine all the respirator parts for signs of damage including the two headbands, noseclip, and if applicable: nosefoam, valve, and faceseal. • Ensure two headbands are securely fastened to the respirator. For respirators with nosefoam, inspect nosefoam to ensure it is fully adhered to the respirator, not •...
Storage Conditions and Shelf Life Before use, store respirators in the original packaging, away from contaminated areas, dust, sunlight, extreme temperatures, excessive moisture and damaging chemicals. When stored in accordance with temperature , the product may be used until the “use by” date specified and humidity conditions specified below on packaging.
Fig. 3b Fig. 4 Fig. 5 1. Keep elastic strap flat (untwisted) and thread the top elastic strap through the top buckle. Repeat for the bottom elastic strap. Place the bottom elastic strap around the head, just below the ears. Untwist the strap. 2.