Fujitsu MB2198-169-E Operation Manual page 13

5.2 Configuring the NMIX pin of the evaluation MCU
■ Configuring the jumper plugs for setting the NMIX pin of the evaluation MCU
The NMIX pin of the evaluation MCU can be configured to be connected to the user system or to be
fixed at "H" on the pseudo power-on debug adapter. The factory default setting of the jumper plug
for setting the NMIX pin of the evaluation MCU are shown in Figure 6, and the jumper plug setting
specifications for the NMIX pin connection of the evaluation MCU are shown in Table 3.
Jumper plug name
User system NMIX
Figure 6 NMIX pin setting circuit
Table 3 Jumper plug settings for configuring the evaluation MCU NMIX pin
Setting
USR
NMIX
EML
BVDDE
10 kΩ
USR EML
[NMIX]
[MD0]
[MD1]
[MD2]
NMIX connection
The NMIX pin of the evaluation MCU is connected from
the user system.
The NMIX pin of the evaluation MCU is fixed at "H" on
the pseudo power-on debug adapter.
Evaluation MCU NMIX
7