Fujitsu MB2198-169-E Operation Manual page 11

4. Connections
■ Connecting to the adapter board
Connect the adapter interface connector of the pseudo power-on debug adapter to the header inter-
face connector on the adapter board.
■ Connecting to the header board
Connect the header interface connector of the pseudo power-on debug adapter to the adapter inter-
face connector on the header board. Refer to the operation manuals of each of the header boards for
details on connecting the header board to the user system.
Notes: • Turn off the power before connecting and disconnecting the board.
• When removing the board, apply force evenly across the board without concentrating on a single
point to remove the board.
Adapter board
Header I/F
connector2
Adapter I/F
connector2
Pseudo power-on debug adapter
Figure 3 Connecting the adapter board
Pseudo power-on debug adapter
Header I/F
connector2
Adapter I/F
connector2
Header board
User system
Figure 4 Connecting the header board
Header I/F
connector1
Adapter I/F
connector1
Header I/F
connector1
Adapter I/F
connector1
5