Related Manuals for Fujitsu PGA-401P
Summary of Contents for Fujitsu PGA-401P
- Page 1 All manuals and user guides at all-guides.com FUJITSU SEMICONDUCTOR SS01-71047-1E SUPPORT SYSTEM DSU-FR emulator PGA-401P adapter type2 MB2198-130 Operation Manual...
- Page 2 All manuals and user guides at all-guides.com...
- Page 3 After reading the manual, keep it handy for future reference. Warranty and Liability Disclaimers The specifications of the product are subject to change without notice. Fujitsu assumes no liability for any loss or damage whatsoever directly or indirectly arising out of the use of the product. Product Operating Environment Use the product at an operating temperature between 5 °C and 35 °C and at an operating humidity...
- Page 4 All manuals and user guides at all-guides.com Organization of this manual This manual consists of the following six chapters. Be sure to read them all before using the product. Chapter 1 Product Overview and Handling Precautions This chapter provides an overview of the MB2198-130 and its handling pre- cautions.
- Page 5 All manuals and user guides at all-guides.com Indicates a potentially hazardous situation which, if not avoided appropriately, may result in minor or moderate injury and/or damage to the product or the equipment CAUTION to which the product is connected, to software resources such as data, or to other properties.
- Page 6 (i.e., submersible repeater and artificial satellite). Please note that FUJITSU will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products.
-
Page 7: Table Of Contents
All manuals and user guides at all-guides.com CONTENTS Chapter 1 Product Overview and Handling Precautions ........1 1.1 Overview ..........................2 1.2 Checking the Items Packaged ....................3 1.3 Options ..........................4 1.4 Notes on Use .......................... 5 Chapter 2 Product Description ................7 2.1 System Configuration ...................... -
Page 8: Chapter 1 Product Overview And Handling Precautions
All manuals and user guides at all-guides.com Chapter 1 Product Overview and Handling Precautions This chapter provides an overview of the adapter and its handling precautions. 1.1 Overview 1.2 Checking the Items Packaged 1.3 Options 1.4 Notes on Use... -
Page 9: Overview
1.1 Overview This adapter is a development support tool for developing and evaluating hardware and software products which use the Fujitsu’s FR family of microcontrollers. Overview The adapter is intended for use in combination with another device such as DSU-FR emulator... -
Page 10: Checking The Items Packaged
All manuals and user guides at all-guides.com Chapter 1 Product Overview and Handling Precautions 1.2 Checking the Items Packaged Check that your package is complete before using the adapter. Checking the Items Packaged Before using the adapter, make sure that your package contains the following items: •... -
Page 11: Options
Table 1.3-1 lists the options for this product. Purchase them as required. Options Table 1.3-1 Options Name Part number Evaluation MCU Fujitsu FR family controller (MB91Vxxx) * DSU-FR emulator MB2198-01 * DSU-FR emulator header MB2198-XXX * − DSU-FR emulator memory board * −... -
Page 12: Notes On Use
All manuals and user guides at all-guides.com Chapter 1 Product Overview and Handling Precautions 1.4 Notes on Use Take the precautions below when using the adapter. Handling Precautions • Do not put anything on the adapter. • Before plugging or unplugging any cable, be sure to turn the power supply off. •... - Page 13 All manuals and user guides at all-guides.com Memo...
-
Page 14: Chapter 2 Product Description
All manuals and user guides at all-guides.com Chapter 2 Product Description This chapter describes the configuration of the hardware system incorporating the MB2198-130 and shows the names of its components as well as the major specifications. 2.1 System Configuration 2.2 Appearance and Part Names 2.3 General Specifications... -
Page 15: System Configuration
Figure 2.1-1 shows the system configuration for the adapter. Host computer General-purpose External trigger / program execution measuring instrument RS232C, USB, LAN AC in AC adapter Fujitsu Emulator Loader Mode Now. DSU-FR emulator Evaluation Adapter board Adapter (this product) Flat cable... -
Page 16: Appearance And Part Names
All manuals and user guides at all-guides.com Chapter 2 Product Description 2.2 Appearance and Part Names Figure 2.2-1 gives an external view of the adapter board to identify each part of it. Appearance and Part Names Figure 2.2-1 gives an external view of the adapter board to identify each part of it. The adapter board illustrated in Figure 2.2-1 is in the factory default states. - Page 17 All manuals and user guides at all-guides.com Chapter 2 Product Description Emulator connector This connector accepts the emulator (Mounted on the rear side). IC socket for evaluation MCU 401-pin PGA IC socket for mounting an evaluation MCU Memory size select switch This switch sets the capacity of the memory board to use external-memory emulation.
-
Page 18: General Specifications
Table 2.3-1 lists the general specifications of the adapter. Table 2.3-1 General Specifications Item Specification Name DSU-FR emulator PGA-401P adapter type 2 Part number MB2198-130 Evaluation MCU: Internal power supply * 0 V to +5.5 V (UVcc) Power supplies Evaluation MCU: I/O power supply * 0 V to +5.5 V (UVcc) - Page 19 All manuals and user guides at all-guides.com Memo...
-
Page 20: Chapter 3 Functions
All manuals and user guides at all-guides.com Chapter 3 Functions This chapter describes the functions of the adapter. 3.1 Function Specifications 3.2 Connector and IC Socket Specifications... -
Page 21: Function Specifications
All manuals and user guides at all-guides.com Chapter 3 Functions 3.1 Function Specifications Table 3.1-1 lists the major function specifications of the adapter. Function Specifications Table 3.1-1 lists the major function specifications of the adapter. Figure 3.1-1 is a block diagram of external-memory emulation. -
Page 22: Connector And Ic Socket Specifications
Flat cable connectors For connecting the flat cables, see Section 4.2 "Connecting the Adapter Board and the Header Board". Mount the evaluation MCU (PGA-401P package). Evaluation MCU mounting IC For mounting the evaluation MCU, see Section 4.3 "Mounting socket the Evaluation MCU". - Page 23 All manuals and user guides at all-guides.com Memo...
-
Page 24: Chapter 4 Connections
All manuals and user guides at all-guides.com Chapter 4 Connections This chapter explains how to connect individual devices before turning their power on. 4.1 Connecting the Adapter Board to the Emulator 4.2 Connecting the Adapter Board with the Header Board 4.3 Installing the Evaluation MCU 4.4 Installing the Memory Board 4.5 Installing a Bypass Capacitor for DVCC... -
Page 25: Connecting The Adapter Board To The Emulator
All manuals and user guides at all-guides.com Chapter 4 Connections 4.1 Connecting the Adapter Board to the Emulator Connect the adapter board to the adapter board connector on the emulator as illustrated in Figure 4.1-1. Connecting the Adapter Board and the Emulator Adapter board Emulator connector Index... -
Page 26: Connecting The Adapter Board With The Header Board
All manuals and user guides at all-guides.com Chapter 4 Connections 4.2 Connecting the Adapter Board with the Header Board Connect the adapter board with the header board using a flat cable coming with the adapter as illustrated in Figure 4.2-1. Connecting the Adapter Board to the Header Board Adapter board Flat cable... -
Page 27: Installing The Evaluation Mcu
All manuals and user guides at all-guides.com Chapter 4 Connections 4.3 Installing the Evaluation MCU Install the evaluation MCU on the evaluation MCU mounting IC socket on the adapter board as illustrated in Figure 4.3-1 to Figure 4.3-3. To uninstall the evaluation MCU, follow the instruction illustrated in Figure 4.3-4. Installing the Evaluation MCU Open the lever of the evaluation MCU mounting IC socket (SC1) to from the solid-line position to the dotted-line position. - Page 28 All manuals and user guides at all-guides.com Chapter 4 Connections Securing the Evaluation MCU Close the lever of the evaluation MCU mounting IC socket (SC1) from the dotted-line position to the solid-line position to lock the evaluation MCU. Evaluation MCU Evaluation MCU mounting IC socket Figure 4.3-3 Securing the Evaluation MCU Uninstalling the evaluation MCU...
-
Page 29: Installing The Memory Board
All manuals and user guides at all-guides.com Chapter 4 Connections 4.4 Installing the Memory Board To use the external-memory emulation function, plug an optional memory board into the memory board con- nector on the adapter board as illustrated in Figures 4.4-1 to 4.4-3. To uninstall the memory board, follow the instruction illustrated in Figure 4.4-4. - Page 30 All manuals and user guides at all-guides.com Chapter 4 Connections Securing the Memory Board Put the memory board down from the dotted-line position to the solid-line position and hold the memory board between the clips on both sides until it clicks into place to secure it. Memory board Memory board connector Figure 4.4-3 Securing the Memory Board...
-
Page 31: Installing A Bypass Capacitor For Dvcc
All manuals and user guides at all-guides.com Chapter 4 Connections 4.5 Installing a Bypass Capacitor for DVCC If the evaluation MCU has an integrated digital power supply ( DVCC pin), a bypass capacitor can be mounted on the digital power supply as required.When it does not have a digital power supply (DVCC pin) in Evaluation MCU, a bypass capacitor does not need to be mounted. -
Page 32: Chapter 5 Usage
All manuals and user guides at all-guides.com Chapter 5 Usage This chapter describes the basic setup procedures to be followed before turning the power on and the power- on and shutdown procedures as well. Be sure to read this chapter before turning the power on. 5.1 Setting up the Evaluation MCU Power Supply 5.2 Setting the Clock Supply Circuit 5.3 Setting Reset Signals... -
Page 33: Setting Up The Evaluation Mcu Power Supply
All manuals and user guides at all-guides.com Chapter 5 Usage 5.1 Setting up the Evaluation MCU Power Supply Figure 5.1-1 shows the factory settings of the jumper plugs; Table 5.1-1 lists the evaluation MCU power supply specifications depending on the settings of individual jumper plugs from VSEL1 to VSEL4. Setting up the Evaluation MCU Power Supply Figure 5.1-1 shows the power supply circuit configuration around the evaluation MCU. - Page 34 All manuals and user guides at all-guides.com Chapter 5 Usage Table 5.1-1 Jumper Plug Settings Jumper plug Setting Evaluation MCU power supply specifications name The power supply only for emulators is supplied from a user USR side system. VSEL1 The power supply only for emulators is supplied from a user EML side system.
-
Page 35: Setting The Clock Supply Circuit
All manuals and user guides at all-guides.com Chapter 5 Usage 5.2 Setting the Clock Supply Circuit To supply a clock signal from the adapter board to the main clock (X0/X1) and subclock (X0A/X1A) of the eval- uation MCU, install an oscillator and a capacitor on the oscillator IC sockets (SC2 and SC3) on the adapter board, respectively. - Page 36 All manuals and user guides at all-guides.com Chapter 5 Usage Setting the Clock Selector Jumper Plugs Figure 5.2-2 shows the factory settings of the jumper plugs; Table 5.2-1 shows how to set the clock selector jumper plugs. X0/X1 X0A/X1A Figure 5.2-3 Setting the Clock Selector Jumper Plugs (Factory Setting) Table 5.2-1 Jumper Plug Settings Jumper plug Setting...
-
Page 37: Setting A Reset Signal
All manuals and user guides at all-guides.com Chapter 5 Usage 5.3 Setting a Reset Signal The reset signal is supplied to evaluation MCU from the user system or the emulater. Please use a setup at the time of product shipment of a jumper plug. Setting the Reset signal A setup at the time of product shipment of a jumper plug is shown in Fig. -
Page 38: Setting A External Memory Emulation
All manuals and user guides at all-guides.com Chapter 5 Usage 5.4 Setting a External Memory Emulation Figure 5.4-1 shows the external memory emulation block diagram, figure 5.4-2 and table 5.4-1 show the set- ting the memory size select switch and the factory settings of the memory size select switch, figure 5.4-3 shows the factory settings of the setting the memory connective switches;... - Page 39 All manuals and user guides at all-guides.com Chapter 5 Usage Setting the Memory Connective Switches These switches can be used to disconnect address lines disabled by the memory capacity switching function from buffers and using them as user resources instead when the external-memory emulation function is used.
-
Page 40: Power-On/Shutdown Procedures
All manuals and user guides at all-guides.com Chapter 5 Usage 5.5 Power-on/Shutdown Procedures Finish connecting all the components of your entire system, then turn them on in the order: host machine -> emulator -> user system. Shut down your system by turning off the components in the order: user system -> emulator -> host machine. Power-on Procedure To turn the power on, finish making all the required connections and follow the procedure in Figure 5.5-1. - Page 41 All manuals and user guides at all-guides.com Chapter 5 Usage Figure 5.5-2 Dialog Display Shutdown Procedure To shut down your system, follow the procedure shown in Figure 5.5-3. To turn off the emulator, press and release the power switch on the back of the emulator. This returns the depressed switch to the OFF (raised) state.
-
Page 42: Chapter 6 Cautions
All manuals and user guides at all-guides.com Chapter 6 Cautions This chapter lists precautions and important notes on use of this product. That extra cautions apply to the adapter when the external-emulation memory and power-on debug functions are used. General Cautions on the Adapter •... - Page 43 All manuals and user guides at all-guides.com Chapter 6 Cautions memory board is installed. • The data bus used for external-memory emulation is fixed at 16 bits in width. • Although some of the address bus signals, data bus signals, and control lines of the memory board are connected to the user system, the chip select signal is not connected and thus the user system cannot access data in the memory board.
-
Page 44: Appendix User Interface Specifications
All manuals and user guides at all-guides.com APPENDIX User Interface Specifications This appendix describes the user interface specifications of the adapter board. User Interface Specifications Figure A-1 shows the correspondence between the pin numbers of flat cable connectors A and B of the adapter board and those of the header or user system. - Page 45 All manuals and user guides at all-guides.com APPENDIX User Interface Specifications Header or a user system Adapter board Flat cable connector Flat cable connector TOP VIEW TOP VIEW (connector is mounted (connector is mounted in the surface) in the back) Figure A-1 Pin Numbers of Flat Cable Connectors A and B...
- Page 46 All manuals and user guides at all-guides.com APPENDIX User Interface Specifications Table A-1 Pinouts of Flat Cable Connector A Evaluation Evaluation Connector Evaluation MCU Connector Evaluation MCU signal name signal name pin number pin number pin number pin number (temporary (temporary name)* name)*...
- Page 47 All manuals and user guides at all-guides.com APPENDIX User Interface Specifications Table A-2 Pinouts of Flat Cable Connector B Evaluation Evaluation Connector Evaluation MCU Connector Evaluation MCU signal name signal name pin number pin number pin number pin number (temporary (temporary name)* name)*...
- Page 48 All manuals and user guides at all-guides.com SS01-71047-1E FUJITSU SEMICONDUCTOR • SUPPORT SYSYEM DSU-FR emulator PGA-401P adapter Type2 MB2198-130 Operation Manual January 2005 the first edition Published FUJITSU LIMITED Electronic Devices Edited Business Promotion Dept.
- Page 49 All manuals and user guides at all-guides.com...