Cisco N540X-6Z18G-SYS-A Manual page 28

Connect Interface Ports
Figure 33: Removing a Bale Clasp SFP or SFP+ Module
5. Place the SFP module that you removed on an antistatic mat, or immediately place it in a static shielding
bag if you plan to return it to the factory.
6. Protect your router by inserting a clean SFP module cage covers into the optical module cage when there
is no SFP module installed.
Connect Interface Ports
You can connect optical interface ports on line cards with other devices for network connectivity.
Install the Device
28
Install the Device