Cisco N540X-6Z18G-SYS-A Manual page 26

Install the Device
Install a Bale Clasp SFP or SFP+ Module
Figure 31: Bale Clasp SFP or SFP+ Module
Install a Bale Clasp SFP or SFP+ Module
To install this type of SFP or SFP+ module, follow these steps:
1. Attach an ESD-preventive wrist or ankle strap and follow its instructions for use.
2. Close the bale clasp before inserting the SFP module.
3. Line up the SFP module with the port and slide it into the port. (See the figure below.)
Figure 32: Installing a Bale Clasp SFP Module into a Port
Install the Device
26