Cisco N540X-6Z18G-SYS-A Manual page 10

Install the N540-6Z18G-SYS-A/D router with Air Plenum
• For front mount (refer image A), fix the mounting bracket in the front and the dummy cover at the
• For mid mount (refer image B), fix the mounting bracket in the mid and the dummy cover at the
4. Fix the dummy cover (700-131330-01) with help of three screws (48-101850-01).
Figure 14: Fix Mounting Bracket and Dummy Cover
1
2
3
5. Fix the mounting bracket (700-131271-01) with help of four screws (48-101850-01).
6. For mid mount, fix the cable bracket (700-130022-01) with help of two screws (48-101850-01). The cable
bracket is applicable only in case of mid mount.
Figure 15: Fix Mounting Bracket and Cable Bracket
1
2
3
7. Fix the assembly to rack either in the front or in the mid, with help of four screws (48-101690-01).
Install the Device
10
rear.
front.
Mounting Bracket
Dummy Cover
Screw
Mounting Bracket
Cable Bracket
Screw
Install the Device