Parameter Assignment And Structure Of The Module/Channel Parameters - Siemens SIMATIC ET 200SP HA Equipment Manual

Drivers, parameters, diagnostics messages and address space
A.2 Parameter assignment and structure of the module/channel parameters
Valid parameters
Only the values specified in the following are permitted. Values that are not listed are rejected
by the module.
Every parameter data record is checked by the module. If an incorrect parameter is detected, the
entire data record is rejected and the parameters of the module remain unchanged.
A.2 Parameter assignment and structure of the module/channel
parameters
Structure of data record 128
Data record 128 has a length of 20 bytes.
It contains module parameters as well as channel or technology parameters of the 4 channels;
2 bytes each.
34
RQ 4x120VDC-230VAC/5A CO HA
Equipment Manual, 07/2022, A5E39389042-AF