Maintenance; Charge The Battery - Honeywell BW Icon User Manual

Portable multiple gas detector
Hide thumbs Also See for BW Icon:
Table of Contents

Advertisement

CHAPTER
3

Charge the Battery

You can charge the battery via an IntelliDox module, the charger adaptor & USB Charger, and the
Cradle Charger.
Note:
The lithium battery may require 5 hours to full capacity. While charging, the battery icon will flash
amber once per second. The time needed to charge will increase if the apparatus is activated. The
detector may be warm during charging; this is normal. To preserve the life of the battery,
deactivate the device when not in use.
The battery operating temperature is -40°C~ +60°C.
The Icon uses a lithium battery that may present a risk of fire or chemical burn hazard if misused.
Do not disassemble, heat above 100°C, or incinerate.
To avoid personal injury and property damage, adhere to the following:
l
Charge the battery immediately when the apparatus emits a low battery alarm.
l
Charge the battery in a safe area that is free of hazardous gas in a temperature range from
l
0~45°C.
If the device is out of charging range, the battery icon flashes blue.
l
Charge the battery using Honeywell charger adapters designed for this apparatus only. Do not
l
use any other charger adapters. Failure to adhere to this caution can lead to fire and explosion.
If replacing the battery, use only approved lithium polymer cells that are available through
l
Honeywell. User of any other cell can cause fire and explosion.
BW Icon
Shop for Gas products online at:

Maintenance

CanarySense
www.
WARNING
CAUTION
27
.com
User Manual
1.888.610.7664

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bw icon+

Table of Contents