Momento Coffee & Milk - Nespresso Momento Coffee User Manual

Set standalone machine
with / without filter
Water filter installation for
standalone machine
3.4.2. Momento Coffee & Milk
Once the machine is started for the first time or after a reset to factory setting, users are guided step by step through the first installation wizard. Follow the
screen instructions, you will be guided through the following steps. Use the screen symbol to navigate.
• set language
• welcome to Nespresso
• set time zone
• set time
• set date
• set energy saving modes
• set coffee temperature
• set milk temperature
Go to previous screen
Go to next screen
Set language
Momento machines are designed to work in optimal conditions with a water filtration cartridge.
Either with:
– "internal" water tank filter: Brita (Vivreau for America zones) in a standalone configuration.
– or "external" filtration system installed with a direct water connection (requires Nespresso service partner)
For Momento Coffee (Momento Coffee / Momento Coffee & Coffee) installed in a standalone setup, the use of internal
filter is recommended but can be skipped, for example when the machine operates with soft water hardness.
water filter installation
yes
would you like to install a water
filter?
no
water filter installation
B
adjust the bo om filter ring to: C
If the filter option is chosen, you are
guided through the various steps.
Follow the instruction on screen
Please place a container with su cient
capacity under th outlets.
start rinsing
To complete the new water filter
installation, the machine will auto-
matically perform a rinsing cycle of
approximately 0.5 liters through the
outlets, to ensure optimal perfor-
mance. Therefore, place a container
with enough capacity under the
outlets.
• set recipes (recommendation
screens)
• select recipes
• set recipe cup length
• set functions
• set function cup length
• set top up
• set access code
Confirm symbol
Cancel (back to main screen)
set language
English
International English American
(default)
Australian English German
Select the appropriate option and tap on the "
water filter installation
squeeze it several times until all air
bubbles have been removed
i
machine is heating up
Once the rinsing is completed the
machine, the first installation is
completed. The machine heats up.
• set water hardness
• set machine operating mode
• set machine with / without filter
(as of SW 6.24)
• water filter installation (if filter
is set)
• set milk system
• milk foam quality adjustment
Select desired language and tap on "
The languages are grouped by similar languages, so that it is easier to
i
find the correct one.
" symbol to proceed.
water filter installation
i
insert internal filter
" symbol.
EN . 19