Nespresso Momento Coffee User Manual page 18

Set function cup length
Set top up
Set access code
Set water hardness
Set machine operating mode
EN . 18
set function length
hot water
set top up
yes
do you want to enable top up?
no
1
1 2
enter your new 4 5
access code
7 8
0
The default access code for the main-
tenance and setup menu is 8888.
Enter the new access code and tap on
the " " symbol.
1
water hardness
fill a glass with tap water and
get the test strip out of the
filter box
Prepare items as instructed. Follow the
instructions on the screen.
Momento machines can be installed either as a standalone machine or connected to the direct water connection.
When machine is set as standalone, the water management is done manually using the machine water tank. When
selecting direct water connection, you are directed to the technician menu. In that sense, only the Nespresso service
partner is allowed to install this option that requires the installation of the direct water connection kit.
water filter installation
standalone machine
select filter type
direct water connection in
Use the + / – button to set your preferred cup length. Refer to the cup size
information indicated in the recipes list. The recommended cup length is
indicated with the Nespresso logo.
After finishing the recipes, it can be topped up with the latest ingredient
(see recipe list on page 17). If you do not want to offer the topping up
function select "no".
2
1
3
confirm your new
6 4
access code
9 7
Confirm the new access code and tap
on the " " symbol.
2
water hardness
dip the reaction field of the
test strip in the water for 1
After 1 minute in water, the test strip is
coloured.
Select the appropriate option and tap on the "
2 3
5 6
8 9
0
3
water hardness
a er 1 minute select the colour of
your test strip
second
Tap on "A", "B" or "C" symbol to match
the colour of your test strip. Tap on
the
" " symbol to proceed.
" symbol to proceed.
A
C