Using the cable to connect to the fixed
broadband
1.
Connect the cable.
2.
Configure the settings of your device for the fixed broadband.
1)
Log in the webGUI configuration page.
2)
Select Settings > Ethernet Settings > Dial Mode.
3)
Enter the parameters and then click Apply.
TIP:
Please contact with your service provider for the fixed broadband
information.
3.
Use your client to enjoy the Internet service.
Configuring Your PC
Follow the following steps and figures for Windows XP to configure
the Internet Protocol for your Wi-Fi connection.
1.
Right-click My Network Places, and then select Properties.
13