Zte MF65 Getting Started

Getting to Know Your Device
Appearance
The following figure is only for your reference. The actual product may be
different.
ZTE MF65
Let's go
Getting started with your device.
LEGAL INFORMATION
1. LED Indicators
Copyright © 2013 ZTE CORPORATION.
2. Power Button
All rights reserved.
3. WPS Button
No part of this publication may be excerpted, reproduced, translated or utilized in
4. Micro USB Port
any form or by any means, electronic or mechanical, including photocopying and
5. (U)SIM Card Slot
microfilm, without the prior written permission of ZTE Corporation.
6. microSD Card Slot
The manual is published by ZTE Corporation. We reserve the right to make
modifications on print errors or update specifications without prior notice. NOTE: microSD logo
is a trademark of SD Card Association.
Version No. : R1.1
Indicators
Edition Time : 2.5.2013
NOTE: Indicator Status
Do not use the device in an enclosed environment or where heat dissipation is
poor. Prolonged work in such space may cause excessive heat and raise ambient Error status. Not registered to the mobile
Red solid network, no (U)SIM card inserted or no
temperature, which may lead to automatic shutdown of the device for your safety.
Network
In the case of such event, cool the device in a well-ventilated place before turning network service available.
on for normal use.
Green solid Registered to the mobile network.
Connected to the mobile network and data is
ZTE CORPORATION
Green blinking
NO. 55, Hi-tech Road South, ShenZhen, P.R.China being transferred.
Postcode: 518057
1 2
Indicator Status Description
Blue solid Wi-Fi is active.
Wi-Fi
Blue blinking WPS is active.
LED light off Wi-Fi is off or your device is in sleep mode.
Red solid/
The battery is low. Please charge the battery.
blinking
Battery
Green blinking The battery is being charged.
Green solid The battery level is middle or high.
Your device is in standby mode and not being
LED light off 1. Slide the back cover and remove it
charged, or the battery is not inserted.
Connection Scenario
Your device supports two methods to connect to the Internet and supports
multi-clients for surfing on the Internet at the same time. The following figure
is only for your reference.
• 3G Mode: Use your (U)SIM card to access the Internet.
2. Insert the (U)SIM card.
WARNING: Do not use nonstandard or incompatible SIM card. Otherwise
your modem may be damaged.
Description
• AP Station Mode: Your device will connect to other WLAN device
(hotspot device, wireless router, etc.) via Wi-Fi to access the Internet.
The WLAN device has already connected to the Internet.
NOTE:
The subnets of your device and other WLAN device must be different.
3
3. Insert the microSD card if necessary.
Installing Your Device
4. Insert the battery.
5. Close the back cover.
4 5
NOTE:
Connecting to Your Device
Please check the label on your device to get the default SSID.
4. Input the password, and then click Connect.
Via Wi-Fi
1. Power on your device directly. It will take 1~2 minutes to initialize.
2. Use your normal Wi-Fi application on the client to search for the available
wireless networks.
NOTE:
You may need to input the password for Wi-Fi connection. Please check the
label on your device to get the default.
5. Wait a moment, and then the client will connect to your device
successfully.
NOTE: Please set the client to obtain an IP address automatically referring to
the chapter "Configuring your PC", and then the client will get an IP address
like "192.168.0.101".
3. Select the SSID of your device, and then click Connect.
6 7
Via USB Cable
1. Connect to the device.
2. Power on your device.
3. The OS detects and recognizes new hardware and finishes the
installation automatically.
NOTE:
If the system does not launch installation automatically, you can run the
installation program in path of My Computer > ZTEMODEM.
4. Wait a moment, and then the client will connect to your device
successfully.
Accessing the Internet
3G Mode
After the client connected to your device successfully, you can access the
Internet in the Automatic or Manual mode. The default mode is Automatic.
Mode Operations
Your device will connect to the Internet automatically, and
Automatic
your clients can surf on the Internet directly.
Log in the webGUI configuration page, and select Settings
Manual > 3G Settings > Network Select > WAN Connection
Mode > Manual, and then click Connect or Disconnect.
8