Pyle PLCD43BTM User Manual page 8

•
Press and hold the SEL button on the front panel or press the SEL/ENTER button
on the remote control to access these additional functions: VOL (LAS/ADJ), AREA
EU/US, CLOCK 12/24, BEEP ON/OFF.
- VOL (LAS/ADJ): This option allows you to preset a volume level as the power-on
memory volume level.
- VOL LAST: In this mode, the unit switches on at the actual volume it had when it
was last switched o .
- VOL ADJ: In this mode, the unit power on at the actual volume that you preseted
a constant switch-on volume level.
Press the SEL button to enter the constant switch-on volume adjusting mode
and the "A-VOL XX" will be shown on the LCD display.
Then you can adjust a constant switch-on volume level by rotating the VOL knob.
- AREA EU/US: This car radio is equipped the Europe / USA frequency.
Rotate the volume knob to switch between USA and Europe frequency.
The system will change the frequency setting in about 3 seconds.
- CLOCK 12/ 24: This unit is equipped with two types of clock display formats,
12 and 24 hours.
Rotate the volume knob to choose 12 hours format or 24 hours format.
- BEEP ON/OFF: Enables or disables the "BEEP" signal to con rm use.
•
Rotate the VOL knob on the front panel or press the VOL+
the remote control to adjust the selected item.
Set the Clock (CLK)
1. To display clock time, press the CLK button.
2. To set clock time, press and hold the CLK button and the hour will ash.
3. Press the
the hour.
4. Press the CLK button and the minutes will ash.
5. Press the
the minute.
6. Finally press the CLK button to con rm the time adjustments.
Change the Source (MODE)
Press the MODE button to switch between RADIO, BT (Bluetooth), DISC (with a
CD/MP3 disc inside the disc slot), USB (with USB device inserted) and AUX -IN
(auxiliary input) modes.
8
www.PyleUSA.com
or button on the front panel or on the remote control to adjust
or button on the front panel or on the remote control to adjust
/VOL- button on