Pyle PLCD43BTM User Manual page 11

Automatic Store station/Preset station scan (AMS)
Press and hold the AMS button for more than 2 seconds to select six strong stations
and store them in the current band. The radio will automatically scan the current
frequency and enter the six strongest stations into the preset memory positions for
that band. Brie y press the AMS button on the remote control to recall each preset
station that saved in the memories in each band.
LOCAL/DX
In urban areas, most stations are strong enough and "LOCAL ON" mode should be
selected. Switch to LOCAL OFF mode to search for stations with weaker signals.
Press the LOC button on the remote control to choose local or distant reception
mode.
STEREO/MONO
FM station is received in stereo mode. However, if the signal is weak or reception is not
as good as you would like, switching to MONO mode usually improves the overall
sound quality. Press the ST button on the remote control to choose FM STEREO or
MONO audio e ect.
DISC/USB OPERATION
To insert DISC/USB
•
To play les on a disc, insert a disc with the label surface facing upward into the
disc slot. Playback will begin automatically.
•
To play les on a USB device, open the USB port cover and insert the USB storage
device into the USB port. Playback will begin automatically.
Eject Disc/USB
•
To eject a disc, press the
eject the disc and then remove it.
•
To eject a USB device, press the
device.
Play/Pause
Press the (play/pause) button to pause or resume playback.
Label surface up
button to stop playback. Press the
button to stop playback, then remove the USB
(eject) button to
www.PyleUSA.com
11