Checking The Chain For Dirt - KTM 300 EXC Owner's Manual

12.31

Checking the chain for dirt

Main work
–
Check throttle cable routing. (
–
Position the fuel tank and fit the two spoilers to the sides in
front of the radiator bracket.
–
Make sure that no cables or throttle cables are trapped or dam-
aged.
V00352-11
–
Attach the fuel tank breather hose.
–
Mount and tighten screw
Guideline
Remaining screws,
chassis
–
Position the horn with the horn bracket.
V00351-11
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
Connect the fuel hose.
V00350-11
Finishing work
–
Mount the seat. (
–
Check the chain for heavy soiling.
» If the chain is very dirty:
–
Clean the chain. (
400678-01
SERVICE WORK ON THE CHASSIS 12
p. 79)
1
with the rubber bushing.
M6 10 Nm (7.4 lbf ft)
2
with the collar bushings.
M6 10 Nm (7.4 lbf ft)
p. 66)
p. 74)
73