8.7
Preparing vehicle for high temperatures or slow riding
8.8
Preparing the vehicle for low temperatures or snow
–
Check the radiator cap.
Value on the radiator cap
»
If the indicated value does not correspond to the setpoint
value:
M01129-01
–
Change the radiator cap.
–
Adjust the secondary drive to the road conditions.
Info
The transmission oil heats up quickly when the clutch
is operated frequently due to an excessively high sec-
ondary drive.
–
Clean the chain.
Chain cleaner (
600868-01
–
Clean the radiator fins.
–
Straighten bent radiator fins carefully.
–
Check the coolant level. (
–
Mount the air filter rain cover.
Air filter rain cover (79006921000)
Info
Observe the KTM PowerParts fitting instructions.
–
Adjust the carburetor jetting and setting.
Info
M01106-01
Your authorized KTM workshop can recommend the
right carburetor tuning.
PREPARING FOR USE 8
1.8 bar (26 psi)
Warning
Danger of scalding During motorcycle oper-
ation, the coolant gets very hot and is under
pressure.
–
Do not open the radiator, the radiator hoses
or other cooling system components if the
engine or the cooling system are at operat-
ing temperature.
–
Allow the cooling system and the engine to
cool down before you open the radiator, the
radiator hoses or other components of the
cooling system.
–
In the event of scalding, rinse the area
affected immediately with lukewarm water.
p. 146)
p. 112)
39