KTM 300 EXC Owner's Manual page 63

–
Position the upper triple clamp with the handlebar.
–
Position the clutch line and wiring harness.
–
Mount screw
V00336-11
–
Position the combination instrument holder, and mount and
tighten screws
Guideline
Remaining screws,
chassis
S03514-11
–
Position the fork legs.
Bleeder screws
Info
The rebound damping is located in right fork leg REB
(red adjuster). The compression damping is located in
left fork leg COMP (white adjuster).
Grooves are milled into the side of the upper end of the
fork legs. The second milled groove (from the top) must
S04313-13
be flush with the upper edge of the upper triple clamp.
–
Tighten screws
Guideline
Screw, bottom triple
clamp
S03648-10
–
Tighten screw
Guideline
Screw, top steering
head
S03650-10
SERVICE WORK ON THE CHASSIS 12
4
but do not tighten yet.
5
.
M6
6
are positioned toward the front.
7
.
M8
4
.
M20x1.5
10 Nm (7.4 lbf ft)
15 Nm (11.1 lbf ft)
12 Nm (8.9 lbf ft)
61