MDX-F5800
3-6.
MD COVER ASSY
3 MD cover assy
shaft (MD cover guide)
cassette holder
3-7.
FLOAT BLOCK
A
float block
14
A
2 Pushing the cassette holder in the direction of the arrow A with a
screwdriver, etc., disengage the shaft (MD cover guide) from
the slot in the MD cover assy.
Note: Take care not to scratch the optiocal pick-up when pushing
the cassette holder with a screwdriver. etc.
3 Pushing an arrow A part, raise the float block
up ward at the front to release a lock.
lever (lock R)
lever (lock L)
2 two tension springs (float F)
1 tension spring (FL2)
5 two dampers assy
4
1 four screws
(BVTT2 × 4)
6 float block
5 two dampers assy
1 tension spring (FL2)