Rear-Panel Features - Agilent Technologies V2920A Installation And Quick Start Manual

Item Description
USB port connects to USB devices: mouse, keyboard, or USB flash drives.
7
USB port connects to USB devices: mouse, keyboard, or USB flash drives.
8
Preset button sets the instrument to a state of initialized default settings.
9
Power button switches the instrument power on and off.
10

Rear-panel features

Item Description
RF OUT outputs the RF signal to instruments that have a rear Type-N RF input. This output
1
(V2920A-RPC) provides signals in one of the following ranges, depending on the
instrument frequency option:
V2920A-504: 400 MHz to 4 GHz
V2920A-506: 400 MHz to 6 GHz
Power inlet/switch, fuse module connects the instrument to AC power.
2
LO IN / LO OUT is for future use.
3
100 MHz IN inputs the 100 MHz reference signal.
4
VGA OUT connects the instrument display to an external monitor.
5
Agilent V2920A Vector Signal Generator
Installation and Quick Start Guide
NOTE: When the
Desktop Control
is running
Panel software
(controlling the instrument),
the following physical
instrument features are
disabled:
▪ Digital I/O (#7)
▪ Communication with the
instrument over GPIB,
USB, and LAN at the
instrument's IP address
(communication via LAN
[socket only] at the PC's
IP address is still
supported)
Installing the System
1-7