ESG Family Signal Generators
Rear Panel
The following pages describe the numbered items shown in the figure below.
1.
AC Power
Receptacle
2.
GPIB
3.
SYMBOL SYNC
OUT
Quick Start Guide
The power cord receptacle accepts a three-pronged cable that is
shipped with the instrument. The line voltage is connected here.
The GPIB connector allows communications with compatible
devices such as external controllers. It is functionally equivalent to
the AUXILIARY INTERFACE connector.
The TTL/CMOS-compatible SYMBOL SYNC OUT connector
outputs a symbol synchronization pulse, one data-clock period wide,
for use in digital modulation applications. This female BNC
connector is present only on instruments with Options UND or
UN8. With Option 201 you can select from several different output
signals for this connector.
Exploring the User Interface
Rear Panel
2-11