Appendix C System Exclusive Format - Peavey TubeFex Operation Manual

Appendix C System Exclusive Format

The following is the format for the System Exclusive dump and load requests:
FO 00 00 1B 09
W h e r e :
cm
nn
or Dump Set requests. Do not include in Dump All Presets, Controllers, or Programs.)
data
cksum = modulo 128 checksum included only in load messages.
Note: For valid SYSEX DUMP requests, the data and checksum is not included.
Note: All numbers are in hexadecimal
cm nn
00 nn Dump One Preset (nn = 00 - 7F) including continuous controllers.
02 nn L>ump Preset Set (nn = 00 - OS) including continuous controllers.
04
OE - Dump Edit Buffer
Dumps ten preset's parameter datd and continuous controllers.
Dumps all 128 user preset's parameter data, continuous controllers, and the program/
volume
Dump All
Dumps contents of name, chain, parameter, and continuous controller fi-om edit buffer.
SYSEX Dump File Format
The following information is provided for programmers wishing to make use of sysex dump files to initialize
remote editing software.
The first ten bytes transmitted in response to a dump one preset request is the sysex load one preset header.
Following that, in nybl~lizcd form are ten mmbytes. Next come ten
Finally come 125) nybblized bytes representing the effect parameters. The fornut of this data is the same Ii ~-mat used
in the remote editing comnyands. The order of the effecz and the number of bytes for each effect is as follows:
Appendix C SysEx Format
representing the ef'fecb chain.
C-7