Program Mapping - Peavey TubeFex Operation Manual

. whoops, wrong stoly.
Once upon a time there lived a musician who was very discouraged with the trdde he had to go through
to chqqe from one preset to the next (he had only one button to use, and all it did was go up one preset
at a time . . .gasp!'). He wished that it was possible to take his favorite and most useful presets and place them
in such a way that he could move from one to the next with ease, but he didn't want to reprogram them,
that would be too cumbersome. It was then that this young musician discovered a wondrous invention-
program mapping. This magical thing called a Program Map allowed the musician to place ;tII his favorite
presets in whatever order he chose-it was a dream come true, and he progranin~ed lqpily ever after.
Okay, maybe a Program Map isn't '~wondro~is" or even "magic:il" but it is a useful way to move fi-c
to the next when you are using the front panel, or 21 foot controller with an increment and declwment 13utton.
A Program Map is simply ;I diagram that points fi-on1 a program hay, Al > to ;I preset (for instance,
When nelv, or reinitialized, the Tube Fex restores the Program Map to the factory defdt settings, where the
program number corresponds one-to-one with the preset number (e.g., AO=I JO. . .ASO=l JSO, etc. >
The following tutorial should help to illustrate the usefulness of the Pr~gr;im Map.
to them from the front panel of the Tube Fex:
Preset #
Going from one preset to the next without mapping them would
had to put up with. (Just think about changing from
Luckily, ure are going to show
to do this once.
1. Press the Play button. This places
number and the preset rume/numher on one screen. For instance:
Cursor under Program Number
2. Press the right arrow button one time to place the cursor under the preset name. This leaves you in
program number
Tutorials
Preset Name Current Program Map #
FOLLOW WAH
way using the Program 11x1~. Pay attention, we're only going
the play mode. In this mode you can view Id1 the program
change the preset name/numl->er assigned to AO.
AO,
you to
Target Program Map #
Al
A2
to using the V and A buttons!)
Cursor under Preset Name &Number
29