Global Stuff: Utility, Midi And Controller Screens - Peavey TubeFex Operation Manual

These mini-tutorials provide instruction on several of the most common global settings for the Tube Fex. Each
mini-tutorial is independent of the previous mini-hKorials. This allows you to learn what you want when you
want to and proceed without wondering if you missed anything in a previous mini-tutorial!
1. Press the Global button until the following screen is displayed:
2. Position the cursor under
display to a comfortd~le viewing angle.
1. Press the Global button until you get to the MIDI screen.
Position the cursor under
2.
the channel over which MIDI messages are received.
1. Press the Global button until you get to the MIDI screen.
2. Position the cursor under
the channel over which MIDI messages are transmitted.
Global button until you get to the MIDI screen.
1. Press
2. Position the cursor under
the channel over which MIDI messages are transmitted. (Make sure the receiving unit is set to receive
on the channel selected.)
32
VA,
use the or left arrow button. Use the V and A buttons to adjust the
RC; use the right or left arrow button.
TC;
use the or left arrow button. Use the V and
TC;
use the or left arrow button.
the V and buttons to change
A
buttons to chxnge
the V and buttons to change
Tutorials