Midi Continuous Controllers - Peavey TubeFex Operation Manual

The format of the IMIDI
HO 00 00 20 00/01/02
(all nunbers in 1iex;idecimal)
where:
MIDI continuous controller 0 (bank select)
00
MIDI 2 byte data indicator
00 selects bank A, 01 selects bank B, 02 selects lxmk C
A MIDI bank select comnmd will tell the unit to switch to a
program is changed either via MIDI program change or from
To set up the preset-to-progmn map, see chapter 2.
Many of the factory presets in the Tube Fex llave MIDI continuous controllers assigned to them. '1'1~ c.ontroller
assignments are set up to take advantage of the
optional MIDI foot controllers. Continuous controllers make tempor:lq chtmgus to dect pat'anlctms
depending upon the vdue of the controller message received. These chmges are only made in the 1 >SP md
not in Preset nieniory or the edit buffer. Continuous controllers x-e not intended for s( xmcl editing, lmt only
for variation during performance. For a description of how to Lssign controllers to c+ExYt p:~i*;tinetei-s, see
chapter 3. For ;I list of controller assignments of the fxtory presets. see the pklylist.
The Tube Fex responds to ,\,!I111 1 'o/?l/lzc~(~ontr~)~~l-7) conmxmd~ on its recei\,e chmnel. You may turn this function
on or off, climge the controller tlxlt volunic' rqxml.5 to, change the rqx mse sde, (x inaniially dxmgc the gI( )l,al
the Global lmtton se\7eral times until the volume menu app~rs ;IS Ixlc w:
Press
With the cursor flmhing under the volunie le\d, use the V of A l~uttons to adjust thv vc~lcrinv. This voluint
level 3ffects all presets md renxiins the smie e\.en \z.liile climging from ant' lxesct to 3tiotl1cr. 'l'li3t's b;l>p
n-e refer to it 3s the ~k,ha/~.olume.
To turn the MIDI ~olurne feature
the bottom line of the displq. USV the V or
To change the controller nundxr to \xhich the ~~)lutne responds, pl:tcc the C'II~SO~ unclcr tile # sign on the
Using MIDI
Chapter 4
select message is:
ON, press the
A
program in the new bank the next time the
the front panel.
ON OFF.
23