SAFETY
WORKING CLEARANCES
It is always a good idea to be aware of your clearances around, in
front, behind and especially above your work area or travel rout.
.Some basic safety precautions to prevent risk are:
•
When working or traveling in an area where clearances are a
problem, travel at a slow cautious speed.
•
If you are not sure of your clearances, request the aid of another
person who can guide or warn you if you get too close to objects.
•
Be aware of the dangers when working around overhead
electrical lines, high humidity may pose an electrical hazard even
if your machine clears the overhead power lines.
•
If your machine should come in contact with overhead electrical
lines, stop the machine and remain on the machine until the
power company clears the lines and it is safe to get off or move
the machine.
•
If low power lines pose a greater hazard, ask the power company
to remove the lines until your work is finished.
Cable Voltage
6.6kV
66.0kV
275kV
500kV
1-10
Min. Safe Distance
3 m
10 ft.
5 m
16 ft.
10 m
33 ft.
11 m
36 ft.
WA320PT-5L